Elematic, a global leader in precast concrete production technologies, introduced an all-new flagship model to their best-in-the-industry Extruder family, the Extruder E9, for hollow-core slab production. The new machine will offer high casting speed, second-generation automatic compaction control and sophisticated bouncing prevention. In addition to the standard hollow-core slab production, the new design of the machine will also enable casting of a variety of precast slabs.
Precast concrete offers a faster and a financially more competitive production time with cost savings carried through to site installation. The blending of digital and machinery in precast concrete production technology, thereby offering faster production savings, is where Elematic excels, placing it at the forefront of industry as a result of its continued investment into research and development. This investment has resulted in the continued evolution of innovative and hi-tech precast manufacturing machinery.
The all-new Elematic Extruder E9 is the flagship of best-in-the-industry extruders. Representing the fifth generation of Elematic Extruders, the machine sets a new benchmark for high-speed casting in hollow-core slab production with low production costs.
Equipped with an advanced touch screen user interface, added intelligence and a smart concrete recycling option, the new Extruder will also offer a new kind of modern user experience and significant material savings. The Elematic Extruder family now consists of three different models: S5, P7 and the new E9.
Fast casting offers high ROI
In the past, casting speed was not considered an issue in hollow-core production. In today’s construction market, fast casting is desired because of the demands of tight project scheduling. With the industry’s highest casting speed of up to 2.7 metres per minute – 30% to 70% faster than its predecessors – the new Extruder E9 perfectly responds to the requirements for fast slab production.
“The high casting speed of our new Extruder translates into eight to 10 casted beds in the same amount of time that previously produced only six casted beds. This means even as many as 18 casted beds per day which of course brings extremely high return on investment and naturally very profitable business for the precast producer,” says Jani Eilola, product director Floor Technologies at Elematic.
The remarkable speed is achieved with a new design of the extruding screws, optimised casting parameters and independent screw drives.
Similar to its predecessors, the new Extruder E9 is based on shear compaction technology. Efficient compaction allows for minimum cement content in slabs, because the high density of concrete has an exponential effect on the slab strength.
Multi-product casting made easy
Independent screw driving not only increases casting speed but also enhances the versatility of the product range for the Extruder E9. For years there has been a growing demand for casting different products fast with one machine and the new Extruder is designed to do just that.
“A common example is casting narrow or split slabs. With the new Extruder, it is possible to choose from six different widths on a basic 1.2-metre-wide bed. It brings considerable savings when narrow filler slabs can be casted instead of sawing them to correct measurements,” says Jani Eilola.
The product range also covers, for example, solid slabs, wing slabs, piles and poles, and stadium slabs
Slab quality in focus
The new Extruder E9 also features a second generation automatic compaction control system with the resistance of levelling beam as a new additional input parameter. Together with the independent use of the casting screws it guarantees a balanced casting process as concrete is fed more evenly throughout the whole slab cross section. The casting process is monitored and controlled better which leads to further increased slab quality.
The machine also features an intelligent bouncing prevention system for stopping the pressure fluctuation during compaction from causing waves to the slab surface. Thus, the slab surface will remain smooth and even.
The Extruder E9 also offers a slow speed casting mode. Slow speed reduces the need to stop casting when concrete supply to the machine is restricted. Less stops in the process means better slab quality.
Modern user experience
The Extruder E9 features a modern, intuitive and graphically pleasing 15.6” touch screen user interface. The touch screen is easy to use; you can zoom and drag and drop items similar to any other smart device.
The user interface is designed to meet the everyday casting tasks in precast concrete plants. The operator can, for example, change casting modes directly on the machine.
Recycling concrete automatically
Extruder E9 comes with an option for a smart, environmentally-friendly recycling system. The system significantly decreases concrete consumption and lowers production costs. Once the recycled concrete is transported back into the Extruder, the system slowly mixes it with the fresh concrete to ensure that the mix quality remains on the defined high level.
Extruder E9 forms an efficient working couple with another new machine from Elematic, the Modifier E9, for digging and placing cuttings, recessions and other openings. When combined, they make a perfect match for increasing efficiency and sustainability of hollow-core slab production.
More information from Nina Lehtonen, email: nina.lehtonen@elematic.com / www.elematic.com/en/